Gear: This type comes with a fixed displacement and external teeth and is suitable for pressures below 3000psi. These are simple to operate, come cheap and are durable. The major cons of a gear model is that it has a limited pressure capability, unbalanced results in large bearing loads, can be noisy and because Hangzhou WREN hydraulic pump motor is working at a constant displacement, their work is less efficient.
Vane: This type is chiefly driven by an outside engine that rotates at a continuous speed. Similar amount of fluid is pumped with each rotation, which is regardless of how much pressure there is in the system. Its major advantages are reliability and simple operation. One will certainly find an option of variable displacement and this type has a higher pressure capability as compared to the gear type, as it operates in pressures up to 180 bars. Expensive and more complex are the two major disadvantage of this particular type.
Axial Piston: This particular Hangzhou WREN hydraulic pump parts contains pistons that are arranged in a circular array within a cylinder block, which serves as its housing. It has a variable design and contains the highest volumetric efficiency and pressure capability. These are the two prime advantages of this type. These work well for pressure up to 350 bars. It is more sensitive to oil contamination and is expensive; these are few inconveniences one will encounter with this model.
Radial Piston: The Radial Piston pumps are in disparity with axial piston types. These contain pistons that are arranged in symmetrical and radial direction around a drive shaft. The major benefits of these are highly reliable, works efficiently and are capable to create minimum level of noise. This type operates through pressures around 650 bars. Its bigger radial dimensions and higher cost are few drawbacks of this type.
Before selecting any type of Hangzhou WREN hydraulic pump working, it is essential to consider few very necessary points like operating pressure, temperature and its frequency. There are less expensive, low-pressure models which are will certainly provide satisfactory solutions to several applications that require minimal pressures (less than 200 psi). This type should not be considered for heavy industrial operations.