These beams were specifically designed to have a cell mounted between them, which can then calibrate the required amount of distance and force that is needed. Bolt Tensioner calibrator is available to the customer in many different types, and can also be called pressure calibration equipment, that has to use the HP 6920B meter for measurements.
Bolt Tensioner calibrator was used to measure up to two thousand pounds worth of torque in both clockwise modes, and counter clockwise modes in the past. Periodic calibration is what you will need to perform in order to maintain these instruments.
These instruments are portable, traceable and can easily meet the calibration requirements in the field temperature work areas, but they can also cause many calibration errors if they are not understood or monitored correctly and properly. Every dry-block calibrator comes with a heated block which is designed to have several interchangeable inserts. There will be a sensor that is located inside the block for measuring and controlling temperature, but it is not placed within the insert.
The torque wrench is another well known type of calibrator. This is an item that is used to accurately apply a specific amount of force to a fastener which can either be a nut or a bolt. It is very similar to that of the socket wrench, but it has more special internal mechanisms.
Bolt Tensioner range from the most common household types to specialty types.Check out the website that specializes in wrenches at https://www.atwwren.com for details.
Or contact us
Company Name: Hang Zhou WREN Hydraulic Equipment Manufacturing Co., Ltd.
Address: No. 24, Xingxing Road, Linping, Hang Zhou, China
Tel: +86 571 8811 5720