Removing of an Engine Oil Pump

The application of hydraulic pumps is wide. Generally, it can be summarized as transferring and circulation of liquids within light industry and farming irrigation and pressure boosting. In addition, they can also be used in many other places. And in the daily application of hydraulic pump, especially in the hydraulic installation, one pump can serve more cylinders and motors.

The engine oil pump is indispensable on cars; therefore, its proper operation is very necessary to keep cars running smoothly. Hydraulic Pump For Cylinder pushes oil throughout the motor in order to keep all of the parts moving smoothly. Its failure can lead to many serious problems such as overheating or broken pistons. As a result, you have to replace it to avoid more serious damage.

After all the preparation, you can access the engine oil pump. To do this, you should first locate the oil pan, and remove all the bolts connecting the oil pan to the frame. Once all the bolts are removed, the oil pan can be easily removed. Moreover, you will notice the engine oil pump near the back with the help of the filter and tubes coming of it.

Then, Hydraulic Pump For Cylinder​ is time for you to remove the engine oil pump. It is often held in place with one bolt. In order to remove it, you should remove this bolt at first, and then the pump will come off much easier. After this, you can place the new one on the same place where the old one stays. It is important that the alignment pin is left untouched in its hole.

Hydraulic Pump For Cylinder range from the most common household types to specialty types.Check out the website that specializes in wrenches at for details.
Or contact us
Company Name: Hang Zhou WREN Hydraulic Equipment Manufacturing Co., Ltd.
Address: No. 24, Xingxing Road, Linping, Hang Zhou, China
Tel: +86 571 8811 5720
Fax: 0571-88110210
Postcode: 311100