Replacement of the Valve Seal on the Engine


All the valves mainly have the valve body, valve stem, valve seat, valve clack and valve seal and so on. The entire equipment would fail to work with the absence of any component. In our daily life, the valves and its attaching fitting have been widely used in plenty of custom equipments. For example, the valve seal used in the engine plays an important role during the entire powering process. If the seal has been worn out, it is wise and necessary to replace Torque wrench pump as soon as possible. Actually, we can do it by ourselves. Just take the valve seal on the car’s engine for example.

The tools we need are really simple and convenient to get. They are the wrench set, socket set, hammer, valve spring tool, pliers, screwdriver, air compressor and compression gauge.

Firstly, remove the parts on the engines in sequence. And the spark plugs should be removed carefully. Secondly, the air compressor is powered on to keep the air in 60-90 psi. And the new seal is place on top dead centre while the crankshaft is turned during the whole replacing process. Compression gauge hose is screwed into the hole of the removed spark plug, in order to make sure that the cylinder has been totally pressurized. Afterwards, the spring can be compressed by the valve spring tool and the valve keeper can be removed by the magnet.

Torque wrench pump range from the most common household types to specialty types.Check out the website that specializes in wrenches at for details.
Or contact us
Company Name: Hang Zhou WREN Hydraulic Equipment Manufacturing Co., Ltd.
Address: No. 24, Xingxing Road, Linping, Hang Zhou, China
Tel: +86 571 8811 5720
Fax: 0571-88110210
Postcode: 311100